In the US, hard hats come in two types. Type I protects against a blow to the top of the head. Type II protects against a blow to the top or the side.
So which one do you have to buy? Someone asked OSHA, the US workplace safety authority, six questions about it. OSHA’s written answer is dated 17 August and was reported last week.
What OSHA says
- No type is required by name. The US rules don’t say “Type II”. They say the employer must look at the hazards and provide head protection that fits them.
- But side hazards count. If that check finds people could be hit from the side, top-only protection “may not be adequate”. Then OSHA expects proper protection, for example Type II.
- Fines are possible. An employer who hands out only Type I where there are side hazards can be cited for not providing suitable PPE.
- No automatic rule for certain jobs. Not for cranes, rigging or welding either. Type II is often a good answer, but any head protection that protects as well, or better, is allowed.
- Write it down. The check should say which areas and tasks were looked at, which hazards were found, including blows from the side, and why that helmet was chosen.
The letter doesn’t create new rules. It explains how OSHA reads the ones that exist.
And in Europe? Type I and Type II are American labels. European helmets don’t carry them. But the question is just as good here: where could the blow come from?
Sources: OSHA letter of interpretation, 17 August 2026 · Safety+Health, 12 November 2026




